|
|
 |
||
 |
 |
|
|
Microprocessor based, the Geotech ECM has been designed specifically for ease of use and installation. A basic panel is capable of controlling up to 8 devices from 24 I.S. probe inputs without special software or programming skills. Devices can vary from small signal relays to 75 hp motor starters. A panel can be easily expanded to accommodate up to 32 additional outputs and 96 additional I.S. inputs. Specially designed to control most electrical remediation equipment, it is also versatile enough for other industrial applications. The following are equipment examples that can be controlled by the Geotech ECM:
|
All components are housed in an easy-to-install weatherproof NEMA 4 (IP66) enclosure. A bright 16 x 2 character vacuum fluorescent display communicates to users exactly what is going on with each individual component within the system. As an example, the probe float position and output device on/off status can easily be viewed on the display day or night. Other features include a four-button keypad for changing menu and status display, large hand/off/auto switch controls for direct control over individual system devices. The Geotech ECM is designed for installation in an unclassified location, with intrinsically safe circuit extensions into locations classified as hazardous. This equipment should be installed in accordance with NEC NFPA 70. The Geotech ECM remediation controller is available with a host of options to accommodate site needs and customer preferences. Optional pre-wired circular connectors are available for probe connections to make installation fast and simple. Call Geotech Environmental Equipment, 1-800- 833-7958, for information about additional expansion capabilities including local wireless mesh and remote network accessibility. For more details about the Geotech Environmental Control Module. |
|
|
||||||||||
| As an active member of the environmental equipment community, Geotech Environmental Equipment, Inc. supports programs and organizations recognized as the preeminent resources of technological and science-based advances in our industry. |
|
 |
2008 Global Waste Management Symposium The 2008 Global Waste Management Symposium will serve as a forum for the presentation of both applied and fundamental research and case studies on waste management. The entire community of designers, facility owners and operators, policy makers, and researchers to are invited to participate. The GWMS will be held in a setting in which all participants can share ideas and solve problems. Geotech is pleased to be a sponsor for this event and will be available for attendee networking and to demonstrate our newest equipment. |
 |
WEFTEC.08 "The Water Quality Event" is the Water Environment Federation’s premier annual technical exhibition and conference. More than 100 technical sessions, each with six peer-reviewed paper sessions, and over 25 educational workshops attract the world’s leading water quality professionals. You will meet engineers, scientists, managers, and government officials responsible for municipal and industrial wastewater collection and treatment systems, drinking water treatment, groundwater protection and remediation programs, stormwater management, and surface water quality and ecology management. You will also meet us at Booth 27173, Hall B, and if you give us a call by October 10 we will be happy to bring along the equipment that you would be most interested in seeing and learning about while you are there. |
 |
October 21-23, 2008 WASTECON 2008 Join us for SWANA’s 46th Annual Solid Waste Exhibition. WASTECON continues to be the only international solid waste trade show for solid waste professionals by solid waste professionals. In Tampa the exhibit hall will showcase vendors and service providers who are ready to help you find solutions to your Energy, Climate and Solid Waste challenges. Geotech will be there at booth 627 and if you give us a call by October 10 we will be happy to bring along the equipment that you would be most interested in seeing and learning about while you are there. |
 |
December 2-5 2008 NGWA "Honor the past, treasure the present, and shape the future" is the theme as the NGWA celebrates its 60th anniversary. Water well contractors, scientists, engineers, manufacturers and suppliers will not want to miss this opportunity to learn, share, and work with peers to better understand the many issues and challenges affecting today's, and tomorrow's, ground water industry. Geotech will be at booth 0828 in the exhibit hall. If you give us a call by November 14, we will be happy to bring along the equipment that YOU would be most interested in seeing and learning about while you are there. |
|
Geotech Sales and Service Locations
|
|
 |
|
|
HOME OFFICE
2650 East 40th Avenue Denver, Colorado 80205 Phone: 1-800-833-7958 Local: 303-320-4764 Fax: 303-322-7242 TEXAS SERVICE CENTER FLORIDA SERVICE CENTER NORTH CAROLINA SERVICE CENTER |
MICHIGAN SERVICE CENTER
1099 East Grand River Road, Suite 6 Williamston, Michigan 48895-9062 Phone: 1-800-275-5325 Local: 517-655-5616 Fax: 517-655-1157 VERMONT SERVICE CENTER GEOTECH EQUIPOS AMBIENTALES S.L. |
 |
|
To contact Geotech: Prices and promotions mentioned in this E-mail are valid through September 30, 2008. |
