Geotech Mastehead

EQUIPMENT & SUPPLIES


Ground Water Filtration Equipment

In-Line Filter Holders

Geotech In-line Filter Holders are specifically designed for on-site, rapid filtration of
surface or groundwater samples through larger diameter flatstock filter membranes.

Polypropylene In-Line Filter Holder
Polypropylene In-Line Filter Holder

142mm Polycarbonate In-Line Filter Holder
142mm Polycarbonate In-Line Filter Holder

Aluminum In-Line Filter Holder
Aluminum In-Line Filter Holder


Geotech Polypropylene
In-Line Filter Holder

  • Compatible with a wide range of chemicals
  • Exterior locking ring design allows the unit to be assembled quickly
  • Applications:
    Ultraclean and sterilize liquids
    Aseptic sampling of liquids or gases

Call 1-800-833-7958
Get-A-Quote

Geotech Polycarbonate
In-Line Filter Holder (142mm)

  • Able to use in wide temperature ranges with excellent chemical compatibility
  • Adjustable pressure relief valve
  • Lower cost, lighter weight alternative to acrylic

Call 1-800-833-7958
Get-A-Quote

 

 

Geotech Aluminum
In-Line Filter Holders

  • Designed for use by U.S.G.S. National Water Quality Assessment Program
  • Low cost alternative to stainless steel
  • Ideal for filtration of organics
  • Allows for high pressure filtration,
    preset to 45 psi (3 bar)
  • Single quick release band clamp

Call 1-800-833-7958
Get-A-Quote

Geotech Polypropylene, Polycarbonate
& Aluminum In-Line Filter Holder Specifications

Geotech Filter Holder Manual


102mm Acrylic In-Line Filter Holder with Stainless Steel Bolts
102mm Acrylic In-Line Filter Holder
with Stainless Steel Bolts

142mm Acrylic In-Line Filter Holder with Nylon Bolts
142mm Acrylic In-Line Filter Holder
with Nylon Bolts

Barrel Filter Holder
Barrel Filter Holder

 

 

 

Geotech Acrylic
In-Line Filter Holder

  • 102mm and 142mm filter membrane sizes
  • Nylon or stainless steel bolt versions

Call 1-800-833-7958
Get-A-Quote

 

Geotech In-line Acrylic Filter Holder Specifications
Geotech Filter Holder Manual

 

 

 

 

 

 

Geotech Barrel Filter Holder

The Geotech Barrel Filter Holder is designed for on-site, manual filtration of surface or groundwater samples using a 0.45μm, 102mm diameter flatstock filter membrane. It is ideal for use in areas where a power supply is not available and in-line filtration is either impractical or impossible. Excellent option when standard, non-pressurized bailers are used for sample collection.

Call 1-800-833-7958
Get-A-Quote

Geotech In-line Barrel Filter Holder Specifications
Barrel Filter Holder Manual


Stainless Steel In-line Filter Holder
Stainless Steel In-line Filter Holder

 

PFA In-line Filter Holder with tools
PFA In-line Filter Holder with tools


Geotech Stainless Steel
In-Line Filter Holders

  • 47mm, 90mm and 142mm sizes
  • Designed to minimize resistance and
    maximize flowrate
  • Includes vent relief valve for improved performance
  • Made of 316 stainless steel
  • Rated at 100 psi (6.8 bar)

Call 1-800-833-7958
Get-A-Quote

 

Geotech PFA
In-Line Filter Holders

  • 47mm and 90mm sizes
  • Designed for filtering small volumes
  • All wetted surfaces are PFA to maximize
    chemical compatibility
  • Holder allows membrane replacement without disconnecting tube lines
  • Open face holder for air studies

Call 1-800-833-7958
Get-A-Quote

Geotech Stainless Steel and PFA In-Line Filter Holder Specifications
Geotech Filter Holder Manual





 

 

GEOTECH
ENVIRONMENTAL
EQUIPMENT, INC.

2650 East 40th Avenue
Denver, Colorado 80205
303-320-4764
1-800-833-7958

Other Locations
California
Florida
Michigan
North Carolina
Texas
Vermont
Washington
Spain
China


Geotech on Facebook  Geotech on Twitter  Geotech on LinkedIn


Leptron

Leptron RDASS

Unmanned Aircraft Systems for Environmental Monitoring
Read more...