Oakton Waterproof Field Meters

Oakton Waterproof PCD650

These top-of the-line waterproof meters offer features that are typically found on much more expensive models. The IP67-rated housing allows use in dirty and wet environments without harm to the meter. Datalog up to 500 points either automatically, manually, or at timed intervals. User-selectable “calibration due” alarms, automatic or manual standards recognition, and single or multiple calibration points provide flexibility in meeting your data quality objectives. Infrared (IrDA) wireless technology lets you easily download data – no need for additional cords. The large backlit LCD shows the measured value, measured units, temperature, time, battery life, and menu options.

• Simultaneouslymeasure and display pH,
  Conductivity and Dissolved Oxygen
• Expanded range, resolution, and accuracy, plus
  increasedmemory and advanced communications!
• Ideal for use in dirty and wet environments

Oakton Waterproof PCD650 Specifications
Oakton Waterproof PCD650 Instruction Manual

Oakton Waterproof Field Meters

Oakton Waterproof series Field Meters are easy-to-use microprocessor-based handheld meters to measure various parameters in the lab, plant or field. All meters have an IP67 waterproof rating.

DO 300 Dissolved Oxygen/°C/°F Data Meter:
Galvanic DO sensor requires no warm up. Stores 50 readings with temperature. Independent 100% and Zero DO calibration. Dual display shows mg/L or % saturation plus temp (°C or °F). Auto Temperature Compensation (ATC). Features Auto Off, Hold, and “Ready” indicator.

 

pH/CON 300 pH/Conductivity/TDS/°C/°F Meter:
Dual display of pH, Conductivity, or TDS plus temperature (°C or °F). Separate pH and conductivity/TDS electrodes. Recall previous calibrations, pH slope/offset, and conductivity/
TDS cell constants. Auto buffer recognition allows 5-point calibration for pH, conductivity, and TDS. Auto-ranging display for conductivity/TDS. Automatic Temperature Compensation (ATC). Features Auto-off, Hold, and “Ready” indicator.

 

 

 

pH 310 pH/mV/°C/°F Data Meter:
Push button calibration for up to five points with auto-buffer recognition. Stores and recalls 16 sets of pH, mV, or relative mV readings with temperature (°C or °F). Selectable manual or Automatic Temperature Compensation (ATC) with separate temperature display. Features Auto-off, Hold function, “Ready” indicator, and self diagnostic Error messages.

 

 

 

CON 410 Conductivity/TDS/°C Meter:
Real-time clock stamps stored data with date and time. Stores up to 50 readings with temperature (°C or °F). Selectable manual or Automatic Temperature Compensation (ATC). Selectable temperature coefficient and cell constant. Features Auto-off, Hold function, “Ready” indicator, and self diagnostic error messages.

 

 

 

pH/CON 10 pH/Conductivity/°C Meter:
Switch between pH and conductivity with one button. Features 10 ft. submersible cable and pH/conductivity/temperature all in one probe. Dual display of pH or conductivity with temperature
(°C or °F). Accurate 3-point pH, and 4-point conductivity calibration with auto buffer recognition. Automatic Temperature Compensation (ATC), and Auto-off, Hold, and “Ready” indicator.

Oakton Waterproof Field Meter Specifications
Oakton DO 300 Operating Instructions
Oakton pH/CON 300 Operating Instructions
Oakton pH 300 and 310 Operating Instructions
Oakton CON 400 and 410 Operating Instructions
Oakton pH/CON 10 Operating Instructions