Geotech Multi-Probe Flowblock Monitoring System

The Geotech Multi-Probe Flowblock Monitoring System enables you to measure several parameters of a water sample at the same time using up to 4 probe types.

Features
Specifications
Operation
Downloads

Less than 40mL of void volume with probes installed
Flow rates of 100 mL/min to 1 gpm (3.8 LPM)
Sensors in direct line of sample stream
Block design for field durability
Tubing quick-connect barbs for easy connections and easy cleaning

Volume:		<40 ml cell volume
Flow Rate:		100 mL/min to 1 gpm (3.8 LPM)
Port Sizes:		3.5 x 8 x 8 in. (9 x 20 x 20 cm)
Power Source Custom Configuration A: 2 Small Ports, Up to 3/8" 2 Medium Ports, Up to 5/8" Custom Configuration B: 2 Small Ports, Up to 3/8" 1 Medium Port, Up to 5/8" 1 Large Port, Up to 1"		pH, ORP & ISE electrodes Conductivity & DO sensors* pH, ORP & ISE electrodes Conductivity sensor* DO sensor*
Block w/Fittings Dimensions: Height: Width Length		5" (12.7 cm) 2" (5 cm) 7.5" (19 cm)
Weight:		1.95 lbs. (1 kg)
Materials: Block Quick Connects Strain Relief Strain Relief Grommets		Acrylic Acetal Nylon Neoprene
Options:		Carrying case
*Note:		This guide is for standard sensors. Some sensors such as DO and Optical DO need the field guard removed to fit properly, and intersect the flow path correctly.

The Geotech Flowblock can be used directly in-line with most groundwater pumping systems such as the Grundfos Redi-Flo2™, Geotech SS Geosub, Geotech Bladder Pump, or Geopump Peristaltic Pump, etc. Designed for minimal sample volume to reduce stirring dependence of sensors.

Adobe® Reader® is required

> Specifications PDF