1-800-833-7958 | Sales@geotechenv.com | Find a Location | Español | 中文 |
When additional controls and logic are required or when interfacing SVE and Air Sparge equipment, Geotech can provide you with a Geotech Environmental Control Module (GECM) to operate and monitor all your equipement at one site. Each device is controlled with a HAND/OFF/AUTO (HOA) switch. During normal operation, all devices are set to AUTO for continuous run time.
Geotech Environmental Control Modules (GECM) are microprocessor-based industrial control panels for the operation of remediation and industrial equipment including, but not limited to Geotech branded equipment. GECMs are designed for installation in unclassified locations, with Intrinsically Safe (IS) circuit extensions into hazardous (classified) locations.
Stay in touch with deployed remediation systems via SMS (text message) Telemetry embedded within any GECM. Systems equipped with Telemetry are optimized for simple send-and-receive queries that make remote sites convenient to monitor.
Geotech Environmental Control Module (GECM)
The GECM is a specially designed microprocessor based industrial control panel for operation of a wide variety of industrial equipment including Geotech remediation pumps and blowers. The GECM will accommodate many different combinations of equipment from one control panel. |
Geotech GECM with Telemetry
Systems are connected through a cellular network and accounts are managed through Geotech. Costs will depend on size of systems, frequency of alert conditions and commands, and location relative to cellular service. Antenna types will depend on location and proximity to cell towers. Control panels may be queried for status updates and to respond to alert conditions via simple commands. |