1.800.833.7958

 

sales@geotechenv.com

Español

中文

 

Rental Pneumatic Remediation Pumps

Pneumatic pumps are used in pump & treat applications, particularly at sites where providing electrical service is problematic, combustible vapors are present, or excessive drawdown might damage electric submersible pumps.

Total-fluids pumps pump all fluids from the well, floating product, water, and/or DNAPL. Pneumatic pumps are ideal in low-capacity applications because they can safely run dry without danger of burning out. Pump selection depends on the desired pumping rate, well yield, and the total hydraulic head lift required. Site designers should consult performance curves and data provided by pump manufacturers.

Let Geotech remediation pump experts help you configure the best pump for your site conditions and goals.

Geotech AR4 4" Auto-Reclaimer

Geotech AR4 Auto-Reclaimers
Standard Composite Housing
and Optional Stainless Steel

The AR4 4" Auto-Reclaimer is designed to pump floating hydrocarbons, leachate, condensate in total fluids applications. The AR4 is operated automatically, and needs no controller. Everything needed to operate the system is built into the pump. The design withstands the harshest and most corrosive environments such as landfills or mines.


More Information

Geotech 1.66 Reclaimer

Geotech 1.66 Reclaimer
Geotech 24" (61cm) 1.66 Reclaimer Dual Fill

Flat and 2" Intake Screens

Optional Flat and 2" (5cm) Intake Screens

The Reclaimer System is a positive air displacement pump designed for hydrocarbon recovery, leachate, and condensate in total fluids applications. The pumps are designed to withstand aggressive down-well environments, and highly corrosive fluids without material breakdown or failure.


More Information

Geotech 3.5 Reclaimer

Geotech 3.5 Reclaimer
Geotech 24" (61cm) 3.5 Reclaimer Dual Fill
with Optional Flat Intake Screen

3" and 12" Intake Screens

Optional 3" and 12" Intake Screens

The Reclaimer System is a positive air displacement pump designed for hydrocarbon recovery, leachate, condensate and total fluids applications. The pumps are designed to withstand aggressive down-well environments, and highly corrosive fluids without material breakdown or failure.


More Information

Geotech Guzzler for Total Fluids

Guzzler Total Fluids System

The Geotech Guzzler Total Fluids System is a compact total fluids pumping system designed for shallow well and sump applications with up to 25 ft. (7.6 m) of suction lift. The dual diaphragm pump will provide from 0-4 gpm (0-15 LPM) using from 2-6 cfm (.06-.17 cmm) of air, depending on the suction lift, pumping rate and total discharge head.


More Information